There is nothing to display at this time

Scheduled Catalogue Maintenance - May 29

The catalogue may be unavailable on Sunday May 29 between 6-10am during the monthly maintenance window. We apologize for the inconvenience and thank you for your patience.

Publish Date:

Thursday, May 26, 2022 - 4:30pm

Rymal Road East Construction near Turner Park Branch

Starting Monday May 9, construction starts on Rymal Road East between Massena Drive and Republic Avenue near the Turner Park Branch. The lights will be deactivated and the turning lanes will be closed.

Please use eastbound lanes only to plan your branch visit.

Thank you for your patience.

Affected Branch:

Turner Park Branch

Publish Date:

Thursday, May 26, 2022 - 9:30am

Carlisle Branch closing

The Carlisle Branch (1496 Centre Rd.,) closes Saturday May 28 at 5pm. The exterior drop box is available until June 1st. The new branch at 277 Carlisle Rd., is expected to open in mid-June 2022.

Affected Branch:

Carlisle Branch

Nearest Branches:

Freelton Branch

Waterdown Branch

Publish Date:

Wednesday, May 25, 2022 - 1:15pm

Makerspace Takeout Request Form

Important information:

Pick up 3D print items at Central, Red Hill, Terryberry or Turner Park. Please inform staff you are picking up a Makerspace Takeout request.
Pick up all other Makerspace projects (vinyl, posters, buttons) only at Central Library. Please inform staff you are picking up a Makerspace Takeout request.
Please read and review our Makerspace guidelines* prior to submitting your request.
*Some guidelines may not apply, due to COVID-19. For updates, check COVID Updates Page.
Prices for materials are listed on our Makerspace Price Guide.

Makerspace Hours

See HPL.ca/hours for Open Hours and Close Dates.

Contact Makerspace Staff at 905-546-3200 x3406 Monday-Friday 9:00am-5:30pm and Saturday from 9:00am-4:30pm or email your questions to dml@hpl.ca.

Member Information

Full Name *

Library Card Number *

Email Address *

Booking Type *

3D Print Information

3D Printing Information:

Maximum of two 3D Print bookings per week.
3D Print projects can run during Makerspace open hours.

Preferred Pickup Location *

Print Profile *

Please note, higher quality settings increase the print time exponentially. We may not be able to print a large object at high resolution within the time frame.

Infil Percentage * %

Please enter a number between 5-95, inclusive.

Generate Support? *

Yes

No

Most prints will require supports.

Filament Colour *

Current filament colour selection:

Print Size *

Other *

Please specify the height and width in inches, centimetres or millimetres.

Button Maker Information

Button Maker Information:

Your submitted image must be 1 or 2.5 inches in diameter.
The subject must be in the centre or close to the centre of the image, leaving room on the edges. See sample photo.
Staff will crop your photo to a circular format.
Maximum number of buttons is 12 per person.

Button Size *

1 inch

2.5 inch

Copies *

1-12 copies.

Large Format Print Information

Large Format Printing Information:

Large Format Print projects are a maximum of two hours each.
There is a maximum of 5 prints per submission

Print Pickup Location *

Paper Type *

Enhanced Matte ($2.00/linear foot)

Premium Semigloss Photo Paper ($2.00/linear foot)

Colour *

Full Colour

Black and White

Print Size

Height * in

Width * in

Enter a value between 1-36.

Copies *

1-10 copies.

Vinyl Print Information

Vinyl Printing Information:

Vinyl Print projects are a maximum of two hours each.

Vinyl Type *

White gloss

White matte

Clear gloss

Colour *

Full Colour

Black and White

More than one image? *

Yes

No

More information *

If more than one image please state how many, sizing and amount of copies for each

Print Size

Height * in

Width * in

Enter a value between 1-18.

Copies *

Amount of copies is limited to booking duration. We will do our best to fit as many as possible during the time frame.

Laser Cutter Information

Note: Only one sheet per submission will be accepted.

Material *

1/8" White MDF

1/4" Mahogany

1/4" Maple

Cut or Engrave *

Engrave

Cut

Engraving Information

Image files can only be engraved. Use .svg format for cutting complex shapes.

Engraving Settings *

Graphic

Photo

Graphic sample image goes here.

Photo sample goes here.

Engrave Size

Engrave Height *

Engrave Width *

Cutout Shape

Circle

Square

Files must be in .svg format. Use red for engraving lines and black for cutlines.

Cut Size

Cut Height *

Cut Width *

Number of Copies *

Additional information

Any information not captured above, or specifics about your print.

Upload your file

Go to WeTransfer.com and click the icon on the bottom left
Click "Get transfer link"
Upload file and paste the URL below:

WeTransfer URL *

_{Personal information contained on this form is collected under the authority of the Freedom of Information and Protection of Privacy Act, 1990. MFIPPA\Regulations 29. The information collected will be used in the process of the library’s business. Questions regarding the collection and use of personal information can be directed to: Chief Librarian, Hamilton Public Library, P.O. Box 2700, Hamilton, ON L8N 4E4.}